 Retaining walls is a type of structure that is built to retain soil or land pressure from sliding or eroding away. These walls are also known to visually enhance the look of your home or commercial space. Installing these types of walls come with different benefits such as preventing floods, erosion, landslides, and even sinkholes that can damage your landscape and remove your soil’s nutrients. Retaining walls are usually seen in hill roads, masonry dams, and in homes where it is used as a part of their landscape. Here at Retaining Wall Irving, we highly think that it is also one of the best ROI options you can have as it increases the value of your home! You may contact our contractors at (469) 804-3311 and get a FREE QUOTE! If you are a home or business owner that is interested in enhancing your land or help protect it with the use of these walls, you’ve come to the right article! Here are 8 types of retaining walls for residential and commercial properties. 1. AnchoredThese walls can be usually seen in highway construction where they are used to avoid land or rocks from falling on the road. This type of wall is also known as tiebacks. Anchored walls use deep cable rods or wires that are driven deep into the sideways of the earth. The ends are filled with concrete to provide anchor. 2. CantileveredThis type of wall is connected to a foundation which can hold back a significant amount of soil. It is usually composed of stem and base slabs. It can be constructed from three types:
The slab foundation is usually loaded by back-fill which stabilizes the wall against overturning and sliding. Cantilevered walls require a small quantity of concrete compared with gravity walls. It is also economical up to the height of 10 meters. 3. Counter-FortThis is a type of cantilevered wall that is strengthened with counter forts monolithic with the back of the wall and base slab. They act as tension stiffeners and connects the wall slab to the base slab which reduces the bending and shearing of it. 4. CribThe basic type of this structure is constructed of interlocking individual boxes of reinforced precast or timber. Theses boxes are then filled with crushed stone and other granular materials. These are suited to support planter area but are not recommended to support structures or slopes. 5. GabionThese are walls that are multi-celled, made of stones that are stacked in a rectangular wire mesh. They can also be filled with sand that are used in engineering. Gabion walls are employed for the construction of erosion control structures and is also used to stabilize steep slopes. 6. GravityGravity walls depends on its weight to resist lateral earth pressure. It can be constructed from different materials such as concrete, stone and other masonry unites. Gravity retaining walls are usually large since it requires significant gravity load to counter act the soil pressure. 7. Mechanically Stabilized Earth (MSE)These walls are known to be common and the most economical type of retaining wall construction. Compared to other retaining walls, MSE is supported by the soil and are held together by reinforcements such as plastic meshes and metallic strips. 8. Sheet PileThis type of retaining wall is constructed by driving the steel sheets into a slope or an excavated site. They can be applied in both temporary and permanent works. Sheet pile walls are also considered to be economical until its height of 6 meters. We hope that this list will help you in knowing the right one for your project. Doing it yourself may be ideal but having a professional in this field will help speed up the process and assure that your walls are built well to last for a lifetime!
Contact our specialists here at Retaining Wall Irving at (469) 804-3311 and get a FREE ESTIMATE!
0 Comments
Leave a Reply. |
